ILVE Fusion, Installation, Operating And Maintenance Manual

Page: 8 / 76

8
EN
The furniture finishing should be treated with heat resistant glue (100°C) otherwise its
shape and colour may change due to the inferior heat resistance.
Ideally the appliance should be installed without any adjacent furniture or walls on both
sides (Fig.3.3-A). Furniture on only one side of the appliance is allowed (Fig.3.3-B
andFig.3.3-C). To prevent fire hazard it is strictly forbidden to install any furniture or
walls higher than the appliance on both sides (Fig.3.3-D).
Use of wood decoration plates or boards is not permitted
Minimum distance between the edge of the appliance and the furniture / wall is 250 mm
(Fig.3.4).
Fig. 3.3
Fig. 3.4