Noise-Canceling Headset w/
Bluetooth
wireless technology V20M20_IM_EN_08312007
www.i-Luv.com
- 12 -
OPERATING INSTRUCTIONS
Pairing i913 with your Mobile Phone or Audio Device
Before using this headset, make sure that it is paired with a mobile phone and audio
devices with
Bluetooth
wireless technology. To pair with such a device, follow the
instructions below:
1. If i913 is currently turned on then press the
Multi-Function
button for approximately five
(5) seconds. There will be a high-pitched beep
with red light flashes about 4 times and
headset will go into standby mode.
2. Press and hold the
Multi-function
button
for approximately five (5) seconds until the
red
and
blue
lights blink alternately
around the button. The headset is now
ready for pairing. (
Note:
Pressing the
Multi-function
button longer than five (5)
seconds will turn off the headset. If this
fails, turn off the headset and turn it on
again by holding the
Multi-Function
button for five (5) seconds for pairing mode)
3. Set your mobile phone or audio
device to its pairing mode (phones
and audio devices with
Bluetooth
wireless technology will have their
own pairing instructions. See
owner’s manual of the phone or
device for these instructions).
4. Place the mobile phone or audio device and the i913
close together during pairing. The mobile phone and
most audio devices will detect i913 and identify it,
displaying the model number
i913
.
5. Once the i913 has been identified, confirm as per the
instructions on the device. You will be required to
enter a password on the next screen.
