Page 6 of 17
Ilumipanel ML User Manual Rev. 1
Setup
Remote Device Management (RDM)
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate
bi-directionally along existing DMX cabling. Check the DMX controller’s User Manual or with the
manufacturer as not all DMX controllers have this capability. The Ilumipanel ML supports RDM protocol
that allows feedback to make changes to menu map options.
Beam-Shaping Filters
The Ilumipanel ML can be used with the medium, wide, very wide, or asymmetrical beam-shaping filters
(sold separately).
Follow the instructions below to install the optional filters:
1.
Detach the filter retainer lid by removing the screws attaching it to the fixture.
2.
Place the beam-shaping filter on top of the lenses.
3.
Place back the filter retainer lid on top of the beam-shaping filter.
4.
Screw the filter and the retainer lid back in place.
RDM2go
Power input
Signal
DMX Output
1. Ground
2. Data -
3. Data +
Signal Connector
1. Ground (black clip)
2. Data -
(green clip)
3. Data +
(red clip)
Beam-shaping filter
Filter retainer lid
Screws
