Iluminarc ILUMIPANEL ML, User Manual

Page: 12 / 20

Page 9 of 17
Operation
Ilumipanel ML User Manual Rev. 1
Configuration (DMX)
Use control configurations to operate the product with a DMX controller.
Control Personalities
To set the control personality:
1. Go to the PERSON main level.
2. Select the desired personality, from ARC1 , ARC1+D , ARC2 , ARC2+D , ARC FULL , SOLID ,
SPECIAL1 , or SPECIAL2 .
Starting Address
Each product will respond to a unique starting address from the controller. All products with the same
starting address will respond in unison. To set the starting address:
1. Go to the DMX main level.
2. Select the starting address ( 001 – 512 ).
• See the Starting Address section for the highest starting address you can select for each
personality.
• Make sure that the starting addresses on the various products do not overlap due to the new
personality setting.
Personality Channels Highest Starting Address
ARC1 3 510
ARC1+D 4 509
ARC2 4 509
ARC2+D 5 508
ARC FULL 8 505
SOLID 1 512
SPECIAL1 15 498
SPECIAL2 9 504