Ilumipanel 180 IP Optic RGB QRG
5
DMX
Connection
This product provides a DMX 512 connection by using bare-ended,
IP66-rated signal cable. This cable comes connected to the product.
Signal Wiring
To provide the signal, you have two options:
•
Connect the bare-ended, IP6- rated signal cable from the product
to two IP66-rated signal connectors (DMX In and DMX Out).
•
Use an IP66-rated junction box. If so, make sure to use
IP66-rated conduit.
The signal cable must match or exceed the electrical characteristics of
the Belden 9841 cable for EIA RS-485 applications. You can also use CAT
5, CAT 5e, or CAT 6.
DMX Junction Box
Wiring
DMX Cable Table
Connection
DMX In
DMX Out
IP66 Pin
Ground
Shield
Shield
1
Data -
Black
Green
2
Data +
White
Red
3