Installation
12
Ilumipanel 90 IP Optic RGB User Manual Rev. 01
To assign
individual DMX
addresses to each
product, you must
connect the ILUMICODE
ADDRESSER to each
product, individually.
ILUMINARC®
suggests that you
connect no more
than 20 products
in this mode and keep the
total distance to less than
197 ft. (60 m). Otherwise,
you might need to use an
optically isolated signal
amplifier.
ILUMICODE ADDRESSER
The Ilumipanel 90 IP Optic RGB uses the ILUMICODE ADDRESSER (“Ilumicode”) for
configuration purposes. The diagram below shows how to connect the Ilumicode to this
product. This connection will control multiple products at the same time, all having the
same DMX address.
Important: The Ilumicode must be used to configure this product. The Ilumicode
can be purchased separately through your ILUMINARC® sales representative.
