Head Office
16107 Kensington Drive
#124 Sugar Land
Texas 77479 USA
Tel: +1 281 438 3500
Fax: +1 281 835 5777
e-mail: [email protected]
www.iluminarinc.com
iluminar
Precautions & Handling
▪
Operation
The factory setting is Auto mode (on/off by photo diode). For other modes of operation, the 3-way switch
located at the back of unit may be repositioned accordingly. Connect power cable to the circular
connector and refer to connector pin map for wiring.
▪
Storage
Do not use or store the illuminator outside the specified temperature conditions or where it is subject to
strong vibration.
▪
Cleaning
Remove foreign object on connector.
Remove soil, dust, or foreign object from external surfaces of the product using a soft cloth.
Use alcohol-based cleaning solvents such as isopropyl alcohol to clean, if necessary.
▪
Precaution
Do not apply excessive voltage (Use only the specified voltage). Otherwise, you may get an electric shock
or a fire may occur.
In case of abnormal operation/ fault symptoms, contact your authorized iluminar dealer.
Package
▪
IR328 / WL197 illuminator
▪
Power Cable
