background image

8

CAUTION

1.  Leave at least one inch of space between the fixture and the mounting 

area for maximum performance and lifespan.  

2.  ALWAYS wear protective eye wear when looking directly at the diodes to 

prevent eye damage.  

3.  The LED array should NEVER come in contact with sharp objects.  

4.  Do not touch or apply force to the diodes - this will cause permanent 

damage. 

5.  Only handle, clean or move fixture when it’s unplugged and completely 

cool. 

6.  Keep the fixture free of dust, debris, deposits to ensure the maximum 

potential of the fixture.  

7.  NEVER use cloth to clean the diodes. This will scratch the diodes and could 

potentially break or dislodge them.  

8.  DO NOT use chemicals to clean the fixture. Use ONLY low pressure air or 

low pressure water to remove dust and debris.

Please read the following list carefully prior to beginning installation. 

At ILUMINAR, we stand behind our products and our 

technology as well as our customers. All ILUMINAR LED 

fixtures are backed by our 5-Year Guarantee. Please visit our 

website iluminarlighting.com/warranty for more information.

1-877-540-5588       

iluminarlighting.com                    

[email protected]

GUARANTEE

Summary of Contents for iLBAR iL23 50W






Reviews: