Ilsco TaskMaster TM-CUT45, Instruction Manual

Page: 7 / 16

7
TM-CUT45
OPERATING INSTRUCTIONS
Be sure to read instructions carefully, wear safety goggles, and keep fingers away from cutting
head.
ADVANCING & RETRACTING
1. To advance the tool, lift and lower the pump handle.
2. To retract the tool, twist pump handle completely, then push handles together until blade is
fully retracted.
CUTTING
1. Make sure the blade is fully retracted.
2. Pull head locking pin to open head.
3. Close head and secure locking pin in place. Be sure tool head is completely locked before
cutting or damage will occur.
CAUTION: always wear eye protection
while cutting
WARNING: Hardened material can fly
when cutting. Always point away from
people or objects