background image

4

TB-CUT25-I

SAFETY 

Read all safety warnings, instructions provided with this battery operated tool. Failure to 

follow all instructions listed below may result in electric shock, fire and/or serious injury. 

Save all warnings and instructions for future reference.

WORK AREA SAFETY

• 

Keep work area clean and well lit. Cluttered or dark areas invite accidents.

• 

Do not operate battery operated tools in explosive atmospheres, such as in the  

presence of flammable liquids, gases or dust. Battery operated tools create sparks 

which may ignite the dust or fumes. 

• 

Keep children and bystanders away while operating a battery operated tool.  

Distractions can cause you to lose control. 

PERSONAL SAFETY

• 

Stay alert, watch what you are doing and use common sense when operating a  

battery operated tool. Do not use a battery operated tool while you are tired or under 

the influence of drugs, alcohol, or medication. A moment of inattention while using 

battery operated tools may result in serious personal injury. 

• 

Use personal protective equipment. Always wear eye protection. Protective  

equipment such as rubber gloves, non-skid safety shoes, hard hat or hearing  

protection used for appropriate conditions will reduce personal injuries. 

• 

Do not overreach. Keep proper footing and balance at all times. This enables better 

control of the battery operated tool in unexpected situations. 

• 

Do not let familiarity gained from frequent use of battery operated tools allow you 

to become complacent and ignore tool safety principles. A careless action can cause 

severe injury within a fraction of a second. 

BATTERY OPERATED TOOL USE AND CARE

• 

Do not force the battery operated tool. Use the correct tool for your application. The 

correct tool will do the job better and safer at the rate for which it was designed. 

• 

Remove the battery pack from the tool before making any adjustments, changing   

accessories, or storing tools. Such preventive safety measures reduce the risk of  

starting the battery operated tool accidentally. 

• 

Store idle battery operated tools out of the reach of children and do not allow 

persons unfamiliar with the tool or these instructions to operate the tool. Battery 

operated tools are dangerous in the hands of untrained users. 

• 

Maintain battery operated tools and accessories. Check for misalignment or binding 

of moving parts, breakage of parts and any other condition that may affect the tool‘s 

operation. If damaged, have the tool repaired before use. Many accidents are caused 

by poorly maintained tools. 

Summary of Contents for TaskMaster TB-CUT25-I

























Reviews: