Operation
6.9
Operation using the "ILMVAC-Control 521" PC program
The "ILMVAC-Control" enables the vacuum controller to be operated simply and easily from
the PC. The program can be purchased and installed as an option.
Make the cable connection (O-Modem) between PC and controller.
PC program
Version
Order no.
ILMVAC-Control 521
10.3
620637
The program attempts to find a switched-on controller on COM 1 to 20.
A COM port 1 to 255 can also be defined as a command line parameter:
VCZ521.EXE 2 -> select COM 2
If a controller cannot be found, the program goes into offline mode.
Here, a previously saved curve can be reloaded and printed out.
The following screen appears after the start:
The graph shows the pressure development. Both the chronological and the pressure dis-
play range can be set. Data can also be recorded in the PC memory, which can then be sto-
red as an ASCII file in the "File / Save memory" menu.
In the PSI pressure range, the pressure values for the curve are multiplied by 100 to remain
with integers.
The curve can be printed out by the system printer via the "File / Print curve" menu.
32 Ilmvac
GmbH
115022