3
TABLE OF CONTENTS
GENERAL SAFETY INFORMATION ................................................................ 3-4
WORK AREA SAFETY ...................................................................................3
ELECTRICAL SAFETY...................................................................................3
PERSONAL SAFETY .....................................................................................4
POWER TOOL USE AND CARE .........................................................................4
SERVICE ..............................................................................................................5
IMPORTANT SAFETY INSTRUCTIONS ..............................................................5
SPECIFICATIONS ................................................................................................6
PARTS LIST .........................................................................................................6
OPERATION .........................................................................................................7
WARRANTY ..........................................................................................................7
GENERAL SAFETY AND WARNINGS
WARNING:
Read all safety warnings and instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/or serious injury. The term “power
tool” in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
WORK AREA SAFETY
1.
Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2.
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which may ignite the dust
or fumes.
3.
Keep children and bystanders away while operating a power tool.
Distractions can cause
you to lose control.
ELECTRICAL SAFETY
1.
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching
outlets will reduce risk of electric shock.
2.
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators,
ranges, and refrigerators.
There is an increased risk of electric shock if your body is
earthed or grounded.
3.
Do not expose power tools to rain or wet conditions.
Water entering a power tool will
increase the risk of electric shock.
4.
Do not abuse the cord. Never use the cord for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled
cords increase the risk of electric shock.
5.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
6.
If operating a power tool in a damp location is unavoidable, use a residual current device
(RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
Summary of Contents for WL-2000
Page 2: ......
