LiftLyte Operating Manual - DCNMAN101814 Rev. 3
2
2
Important!
Read this entire document before attempting to install your
LiftLyte™
Introduction
As a unique alternative to hand held lights, the
LiftLyte™ is designed to provide service personnel and car
enthusiasts with a highly effective, full range, under vehicle lighting system. High intensity automobile trouble lights
produce glare and deep shadows that can mask problem areas. Flashlights, floodlights and daylight all share this
same issue.
The
LiftLyte™ uses LED Strip Technology to produce a bright, uniform no-glare light devoid of obscuring shadows.
The system is designed to be installed on the side rails of vehicle lifts or the side walls of inspection pit areas. Even in
the brightest of day time conditions, the LiftLyte can and will be highly effective. Service personnel can effectively and
rapidly scan the vehicle underside, assisting them in searching out trouble areas or for general maintenance purposes.
Before
After
Special LiftLyte Features
•
Full area illumination.
•
No shadows
.
•
Plug and Play installation. No hand tools required.
•
Eliminates lamp or filament breakage in demanding work applications.
•
Over 30,000 hours of lamp life resulting in lower maintenance costs.
•
Resists vibration, impact, sudden movements and shock.
•
Efficient light transmission and emission.
•
Pre-determined light emission pattern for maximum effectiveness.
•
Environmentally protective coatings for maximum durability and long life
.
Components Provided
Item
Qty. DWG Ref No. Product Part Number
Light Strip (Magnetized or double stick tape)
2
1
SUB2-090 Rt. or Lt.
AC Transformer Power Supply
1
2
SUB2-091
Primer Stick (for double stick tape version only)
6
3
M9N-089
Self-Adhesive Tie Down Points
8
N/A
C9N-039
Zip Ties
10
N/A
C9N-011
Self-Adhesive Velcro Tape (optional for mounting Switch)
1
N/A
N/A