9
Initial Bluetooth Connection and Playing Audio
1. Power ON the sound bar by pressing the
Power
button. A voice will say, “Bluetooth,” and the LED indicator will
slowly flash blue. When pairing, remain within 3 feet of the Bluetooth device.
2. Using the controls on your Bluetooth device, select
ItBSW399
in the Bluetooth Settings to pair. If need be, refer
to the user’s manual for your specific device for more information.
3. When successfully paired, a voice will announce, “Bluetooth is connected,” and the LED indicator will turn solid
blue. Audio from the connected Bluetooth device will now be heard through the speaker.
4. Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the
connected Bluetooth device to play, pause, and adjust the volume level.
5. After initial pairing, anytime the speaker powers ON it will automatically connect to the last Bluetooth device
used.
note:
If your device should become unpaired or you find it is unable to connect, press & hold the
Play/
Pause (remote), or Pair button (sound bar)
to enter to Pairing Mode. A voice will announce, “Bluetooth is
connecting,” and you can connect to the speaker manually.
Note:
This sound bar has a last-function-used memory; it will resume using the last mode before it was turned OFF
after it is turned ON again.
Previously Connected Devices
•
The sound bar can remember multiple Bluetooth devices and will always try to reconnect to the last device used.
•
To reconnect to a different device, turn off Bluetooth on unwanted devices, then access the Bluetooth settings
menu on the device you wish to use and select
ItBSW399.
troubleshooting
If the sound bar should become unpaired or will not connect normally, follow these steps in your device’s
Bluetooth Settings Menu.
•
Delete the sound bar (“Forget This Device”).
•
Turn Bluetooth OFF, then ON again, and repeat the
Initial Bluetooth Connection
steps.
Connecting Devices
Line In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the
Line In
on the unit and the
audio
output/headphone jack
on an audio device.
2. Power ON the sound bar and press
Source
on the sound bar or
Line
In
on the remote to select
Line In Mode.
A voice will announce the
source mode and the indicator will turn green.
3. Use the controls on the connected device to select and play audio. Be
sure the volume on your connected device is audible when you begin
playing.
PAIR
LINE IN
SOURCE/
VOL
+
VOL
–
Connect 3.5mm audio cable
(not included) to audio source