background image

EN - 6

2. INSTALLATION

2.1.  Machine positioning

When positioning the machine, place it in 

an area where dishes can be easily loaded 

and unloaded. Do not put the machine in an 

area where the ambient temperature falls 

below 0°C.

Read all warnings located on the packaging 

before removing the packaging and 

positioning the machine.

Place the machine close to a water tap 

and drain. Take into consideration that the 

connections will not be altered once the 

machine is in position.

Do not hold the machine by its door or 

panel.

Leave an adequate distance around the 

machine to allow ease of movement when 

cleaning.

Ensure the water inlet and outlet hoses 

are not squeezed or trapped and that the 

machine does not stand on the electrical 

cable while positioning.

Adjust the feet so the machine is level and 

balanced. The machine should be placed 

on flat ground otherwise it will be unstable 

and the door of the machine will not close 

properly.

2.2.  Water connection

We recommend fitting a filter to your water 

inlet supply in order to prevent damage to 

your machine due to contamination (sand, 

rust, etc.) from indoor plumbing. This will 

also help prevent yellowing and deposit 

formation after washing.

2.3.  Water inlet hose

WARNING:

 Use the new water inlet 

hose supplied with your machine, do not 

use an old machine’s hose.

WARNING:

 Run water through the new 

hose before connecting.

WARNING:

 Connect the hose directly 

to the water inlet tap. The pressure 

supplied by the tap should be a minimum 

of 0.03 MPa and a maximum of 1 MPa. If 

the pressure exceeds 1 MPa, a pressure 

relief valve must be fitted between the 

connection.

WARNING:

 After the connections are 

made, turn the tap on fully and check for 

water leaks. Always turn off the water inlet 

tap after a wash program has finished.

An Aquastop water spout is available 

with some models. Do not damage it or 

allow it to become kinked or twisted.

2.4.  Drain Hose

Connect the water drain hose directly to 

water drain hole or to the sink outlet spigot. 

This connection should be minimum 50 cm 

and maximum 110 cm from flor plane.

IMPORTANT:

 Items will not wash 

properly if a drain hose longer than 4 m is 

used. 

Summary of Contents for IVDSI400X


























Reviews: