background image

3

FCC Warnings 

Warning: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void the 

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply 

with the limits for a Class B digital device, pursuant to Part 

15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses, and can 

radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that 

interference will not occur in a particular installation. If this 

equipment does cause harmful interference to radio or television 

reception, which can be determined by turning the equipment off 

and on, the user is encouraged to  try to correct the interference 

by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

Additional Warnings and Precautions

•  CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH 

WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.

•  Caution and marking information is located at the rear or 

bottom of the apparatus. 

•  Objects filled with liquids, such as vases, shall not be placed on 

the apparatus.

•  Mains plug is used as disconnect device and it should  

remain readily operable during intended use. In order to 

disconnect the apparatus from the mains completely, the mains 

plug should be disconnected form the mains socket outlet 

completely. 

•  WARNING: To reduce the risk of fire or electric shock, do not 

expose this apparatus to rain, moisture, dripping, or splashing. 

CAUTION

: Use of controls or adjustments or performance of 

procedures other than those specified may result in hazardous 

radiation exposure.

•  WARNING: Changes or modifications to this unit not 

expressly approved by the party responsible for compliance 

could void the user’s authority to operate the equipment.

•  WARNING: Do not place this unit directly onto furniture 

surfaces with any type of soft, porous, or sensitive finish. As 

with any rubber compound made with oils, the feet could 

cause marks or staining where the feet reside.  We recommend 

using a protective barrier such as a cloth or a piece of glass 

between the unit and the surface to reduce the risk of damage 

and/or staining.

• 

WARNING:

 This product may contain chemicals known 

to the State of California to cause birth defects, or other 

reproductive harm (California Prop 65). Wash hands after 

handling.

•  This product meets and complies with all Federal Regulations.

Important Safety Instructions

•  Read these Instructions.

•  Keep these Instructions.

•  Heed all Warnings.

•  Follow all instructions.

•  Do not use this apparatus near water.

•  Clean only with a dry cloth.

•  Do not block any ventilation openings. Install in accordance 

with the manufacturer’s instructions.

•  Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) that 

produce heat.

•  Do not defeat the safety purpose of the polarized or grounding 

- type plug. A polarized plug has two blades with one wider 

than the other. A grounding type plug has two blades and a 

third grounding prong. The wide blade or the third prong are 

provided for your safety. When the provided plug does not fit 

into your outlet, consult an electrician for replacement of the 

obsolete outlet.

•  Protect the power cord from being walked on or pinched 

particularly at plugs, convenience receptacles, and the point 

where they exit from the apparatus.

•  Only use attachments/accessories specified by the 

manufacturer. 

•  Unplug this apparatus during lightning storms or when unused 

for long periods of time.

•  Refer all servicing to qualified service personnel. Servicing is 

required when the apparatus has been damaged in any way, 

such as power-supply cord or plug is damaged, liquid has been 

spilled or objects have fallen into the apparatus, the apparatus 

has been exposed to rain or moisture, does not operate 

normally, or has been dropped.

•  Use only with a cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 

sold with the apparatus. When a cart is used, 

use caution when moving the cart/apparatus 

combination to avoid injury from tip-over.

Warnings & Precautions

Summary of Contents for ITTB476BU












Reviews: