background image

3

important Safety instructions

• 

Read these Instructions.

• 

Keep these Instructions.

• 

Heed all Warnings.

• 

Follow all instructions.

• 

Do not use this apparatus near water.

• 

Clean only with a dry cloth.

• 

Do not block any ventilation openings. Install in accordance 
with the manufacturer’s instructions.

• 

Do not install near any heat sources such as radiators, heat 

registers, stoves, or other apparatus (including amplifiers) 

that produce heat.

• 

Do not defeat the safety purpose of the polarized or 
grounding - type plug. A polarized plug has two blades with 
one wider than the other. A grounding type plug has two 
blades and a third grounding prong. The wide blade or the 
third prong are provided for your safety. When the provided 

plug does not fit into your outlet, consult an electrician for 

replacement of the obsolete outlet.

• 

Protect the power cord from being walked on or pinched 
particularly at plugs, convenience receptacles, and the point 
where they exit from the apparatus.

•  Only use attachments/accessories specified by the 

manufacturer. 

• 

Unplug this apparatus during lightning storms or when 
unused for long periods of time.

•  Refer all servicing to qualified service personnel. Servicing 

is required when the apparatus has been damaged in any 
way, such as power-supply cord or plug is damaged, liquid 
has been spilled or objects have fallen into the apparatus, 
the apparatus has been exposed to rain or moisture, does not 
operate normally, or has been dropped.

• 

Use only with a cart, stand, tripod, bracket, 

or table specified by the manufacturer, or 

sold with the apparatus. When a cart is 
used, use caution when moving the cart/
apparatus combination to avoid injury from 
tip-over.

FCC Warnings 

Warning: Changes or modifications to this unit not expressly 

approved by the party responsible for compliance could void the 
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide 
reasonable protection against harmful interference in a 
residential installation. This equipment generates, uses, and can 
radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference 
to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this 
equipment does cause harmful interference to radio or television 
reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference 
by one or more of the following measures:

•  Reorient or relocate the receiving antenna.

•  Increase the separation between the equipment and receiver.

•  Connect the equipment into an outlet on a circuit different 

from that to which the receiver is connected.

•  Consult the dealer or an experienced radio/TV technician 

for help.

additional Warnings and Precautions

• 

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH 
WIDE BLADE OF PLUG TO WIDE SLOT, FULLY 
INSERT.

• 

Mains plug is used as disconnect device and it should remain 
readily operable during intended use. In order to disconnect 
the apparatus from the mains completely, the mains plug 
should be disconnected from the mains socket outlet 
completely. 

• 

CaUTiOn

: Use of controls or adjustments or performance 

of procedures other than those specified may result in 

hazardous radiation exposure.

•  WARNING: Changes or modifications to this unit not 

expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment.

•  WARNING: Use of this unit near fluorescent lighting may 

cause interference regarding use of the remote. If the unit is 

displaying erratic behavior move away from any fluorescent 

lighting, as it may be the cause.

• 

WARNING: Shock hazard - Do Not Open.

• 

Caution and marking information is located at the rear or 
bottom of the apparatus.

•  WARNING: To reduce the risk of fire or electric shock, 

do not expose this apparatus to rain, moisture, dripping, or 
splashing.

•  Objects filled with liquids, such as vases, shall not be placed 

on the apparatus.

To comply with FCC RF exposure compliance requirements, this grant is applicable to 

only mobile configurations. The antennas used for this transmitter must be installed to 

provide a separation distance of at least 20cm from all persons and must not be co-located

or operating in conjunction with any other antenna or transmitter.

Summary of Contents for ITTB401DW













Reviews: