14
RADIO OPERATIONS
Before playing the FM or AM radio on the bar speaker,
connect the included AM and FM antennas to ensure
reliable radio reception.
█ AM LOOP ANTENNA
1. Remove the small rubber wire protector from the
ends of the wires on the included AM Loop Antenna.
2. Press the black buttons on the AM Antenna
Connection to open the antenna connection.
3. Insert the exposed AM antenna wires into the
openings on the AM Antenna Connection.
After releasing the black buttons, the AM Antenna
Connection should have a firm hold on the exposed
wires. If the connection feels loose, or you aren’t
getting good AM radio reception, repeat steps 2 and
3.
█ FM WIRE ANTENNA
1. Insert the plug on the FM Wire Antenna into the FM
Antenna Connection.
2. Extend and adjust the FM Wire Antenna, after
connecting it, to adjust or improve FM radio
reception.
█ TUNING THE AM/FM RADIO
1. Press the
Power Button
to turn the bar speaker on.
2. Press the
Source Button
to switch to
FM Radio
Mode
or
AM Radio Mode
.
3. Press the
Tuning Buttons
to adjust the AM or FM
radio frequency.
•
Press and hold the
Tuning Buttons
to scan for the
next available AM or FM radio frequency.
█ SAVING RADIO STATIONS
1. Tune the AM or FM radio to the desired station.
2. Press the
Mem Button
on the remote.
3. Press the
Menu Up for iPod
and
Menu Down for
iPod Buttons
on the remote to select a memory slot.
4. Press the
Mem Button
on the remote to save the
current AM or FM radio station to the selected
memory slot.
█ SELECTING A SAVED RADIO STATION
1. In
FM Radio Mode
, press the
Memory Buttons
on
the remote to cycle through saved FM radio stations.
2. In
AM Radio Mode
, press the
Memory Buttons
on
the remote to cycle through saved AM radio stations.