To download this User’s Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit
the support section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y francés, o para obtener respuestas a preguntas
frecuentes, visite la sección de apoyo en:
www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol ou français, ou pour obtenir des réponses à des
questions fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.iLiveElectronics.com
Customer Service:
1-888-999-4215
| Email Support:
| Email Parts:
Copyright © 2016 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property
of their respective owners. Specifications are subject to change without notice.
International Support
Protect for Today
Sustain for Tomorrow
Made
Green
Bluetooth Wireless Audio
Pairing to a Device & Playing Audio
After initial pairing, the unit will stay paired unless unpaired manually by
the user or erased due to a reset of the device.
If your device should become
unpaired or you find it is unable to connect, repeat the steps listed here.
1. Power on the unit by sliding the
POWER Switch
to the
ON
position, then
press the
Source button
to set the unit to Bluetooth mode
.
The
pairing indicator
will slowly flash blue
.
2. Press the
Pair button
to begin pairing. The
pairing indicator
will quickly
flash with a dark blue light.
When pairing, remain within 3 feet of the unit.
3. Using the controls on your Bluetooth device, scan for and select
ISBW326
in
your Bluetooth settings to pair. If your device requests a password, enter the
default password
0 0 0 0
.
Refer to the user’s manual for your specific device for instructions on
pairing and connecting Bluetooth devices.
4. When successfully paired, the
pairing indicator
will turn solid dark blue
and an audible chime will sound from the speaker.
5. Use the controls on the connected device to select and begin playing audio.
Audio played through the connected Bluetooth device will now be heard
through the speaker.
6. Use the controls on the unit or the connected device to play, pause, and
adjust volume.
Water Resistance
This unit has a water resistance rating of IPX4. This rating is suitable for indoor and
outdoor use in the presence of incidental or light exposure to splashing water,
rain, or snow. Water splashing against the enclosure from any angle should have
no harmful effects. It is not recommend to submerge this speaker in water for any
amount of time.
IMPORTANT:
To ensure your speaker is prepared for use in a wet environment,
disconnect and remove any power cables, and tightly close the water cap on the
rear of the unit. If the water cap is not properly closed, water resistance will be
compromised and could result in damage to the speaker or personal injury.
Charging the Battery
Requires a Micro-USB to USB cable (included).
1. Using a Micro-USB to USB cable (included), connect the larger
USB plug
to the
USB port
of a powered on computer or USB power adaptor (not
included).
2. Connect the smaller
Micro-USB plug
into the
Micro-USB port
on the back
of the unit. The unit will now charge.
WARNING: DO NOT, UNDER ANY CIRCUMSTANCES,
CHARGE THE SPEAKER WHILE IT IS NEAR WATER, AND
ALLOW AMPLE TIME TO DRY AFTER BEING SPLASHED.
Aux In
Requires a 3.5mm audio cable (not included).
1. Connect a 3.5mm audio cable to the
Aux In
on the rear of unit and the
audio output/headphone jack
on a media player or smartphone.
2. Power on the unit by sliding the
POWER Switch
to the
ON
position.
The
Pairing Indicator
will light
green
.
3. Use the controls on the connected device to select and play audio.
INDICATOR LIGHT
STATUS
Red light ON
Charging battery
Red light OFF
Charging complete
Red light flashing
Low Battery, charge soon
FM Radio
An FM antenna is built into the unit. Adjust the position of the unit to improve
radio reception.
1. Power the unit ON, then press the
Source button
to switch to FM
mode.
2. Press the
Tune
buttons to manually tune to a radio station.
Programming Radio Stations
1. With the unit in
FM mode,
press and hold the
Scan/M+ button
to
automatically search for stations. Stations will automatically be stored as
they are scanned.
2. Press the
M+ button
to cycle through the memory presets.
