To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en
www.iLiveElectronics.
com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance
sur
www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.iLiveElectronics.com
Customer Service:
1-888-999-4215
Email Support:
Email Parts:
Copyright © 2013 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
Bluetooth Setup
Pairing a Bluetooth Device for the First Time
Requires a 3.5mm audio cable (not included)
1.
Connect a 3.5mm audio cable to the
Line In
on the unit and an audio output
on an MP3 player or other audio source.
2. Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Line In
Using the Line In
1.
Power on the unit by adjusting the
Power
switch to the On position.
The
Pairing/Line In Indicator
will flash
blue slowly and the unit will enter pairing
mode.
When pairing, remain within 3 feet of the
unit.
2. Using the native controls on your
Bluetooth device, select the “ISB283” in
your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specific
device for instructions on pairing and
connecting Bluetooth devices.
3. When successfully paired and connected,
the
Pairing/Line In Indicator
will display
a solid blue light and a beep will sound
from the unit.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired or
you find it is unable to connect, repeat the
above steps or press the Pair button to
start the pairing process pairing again.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play or pause the selected track, use
the native controls on the connected
Bluetooth Device.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Using Bluetooth
Playing Audio Wirelessly
Status
Pairing/Line In Indicator
Power Off
No light
Power On
Slowly flashing blue light
Ready to Pair
Quickly flashing blue light
Bluetooth Connected
Solid blue light
Line In Mode
Green light
Status
Charge Indicator
Power Off
No light
Charging
Red light
Fully Charged
Green light
Low Battery
Alarm
Power and Pairing Indicator Lights
Interchangeable Faceplates
1. If there is a faceplate already in place,
remove it gently by pulling outward on the
sides.
2. Align the new faceplate to the front of the
unit, and firmly press into place until a
snap is heard.
Note: Do not pull the faceplate too
forcefully as it may damage it.
Changing the Faceplates
ISB283B-778-01-IB.indd 2
5/30/2013 10:21:09 AM
