To download this User’s Guide in English,
Spanish, or French, or to get answers to
frequently asked questions, visit the support
section at:
www.iLiveElectronics.com
Para descargar este Manual del Usuario en
inglés, español y francés, o para obtener
respuestas a preguntas frecuentes, visite la
sección de apoyo en
www.iLiveElectronics.
com
Pour télécharger ce guide de l’utilisateur en
anglais, espagnol ou français, ou pour obtenir
des réponses à des questions fréquemment
posées, consultez la rubrique d’assistance
sur
www.iLiveElectronics.com
International Support
For Warranty Information and the most up-to-date version of this User’s Guide, go to
www.iLiveElectronics.com
Customer Service:
1-888-999-4215
Email Support:
[email protected], Email Parts: [email protected]
Copyright © 2012 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
Bluetooth Setup
Setup
Charging
Pairing a Bluetooth Device for the First Time
Charging a Device
Charging the unit
Requires a 3.5mm audio cable (not included)
1. Connect a 3.5mm audio cable to the
Line In on the unit and an audio output
on an MP3 player or other audio source.
2. Use the native controls on the
connected MP3 player or other audio
source to play and control audio
played through the clock radio.
Line In
Using the Line In
1. Make sure the unit is plugged into the
wall.
2. Using the appropriate USB charging
cable (not included), connect one end to
the device and the other to the
Charger
on the unit.
Refer to the user’s manual for your
specific device for manufacturers
required charging amperage as well as
determining the appropriate cable for
your device before charging.
Note: This device uses a USB charging
port with a 500mA maximum charging
capacity, making it unsuitable for
charging iPads.
3. The device will now charge.
1. Connect the unit to an AC wall outlet.
Initial charge time ~4 hrs.
Charge fully before use.
2. The
Battery Indicator will display a red
light when the unit is charging, and turn
off when the unit is fully charged.
Note: Charge the unit at least once a
month to maintain battery integrity even
when not in use.
1. Power on the unit by adjusting the
Power
to ON.
2. Press and hold the
Pair button to begin
pairing.
The
Pairing Indicator will flash blue
quickly.
When pairing, remain within 3 feet of the
unit.
3. Using the native controls on your
Bluetooth device, select the “ISB223” in
your Bluetooth settings to pair.
If your device requests a password, enter
the default password “ 0 0 0 0 ”.
Refer to the user’s manual for your specific
device for instructions on pairing and
connecting Bluetooth devices.
4. When successfully paired and connected,
the
Pairing Indicator will display a solid
blue light.
After initial pairing, the unit will stay paired
unless unpaired manually by the user or
erased due to a reset of the device.
If your device should become unpaired
or you find it is unable to connect, repeat
the above steps or press and hold the Pair
button to start the pairing process pairing
again.
1. Follow the instructions for Pairing a
Bluetooth Device.
2. Use the native controls on the
connected Bluetooth Device to select a
track.
3. To play or pause the selected track, use
the native controls on the connected
Bluetooth Device.
4. Audio played through the connected
Bluetooth device will now be heard
through the speakers.
Using Bluetooth
Playing Audio Wirelessly
Status
Battery Indicator
Fully Charged
No light
Charging
Red light
Low Battery
Flashing red light
Status
Pairing Indicator
Power Off
No light
Power On
Flashing blue light
Ready to Pair
Quickly flashing blue light
Bluetooth Connected
Solid blue light
Line In Mode
Red light
Battery Indicator Light
Pairing Indicator Light
1. Open the flap on the back of the unit and
pull out the plug prongs until they are
perpendicular to the unit.
2. Plug the unit into an AC power outlet to
power the unit.
Power