11
Playing a DVD
1. Plug the unit into a standard 10V outlet, and turn the power on by moving the
Power
Switch
into the
ON
position. If the internal battery is charged, the unit does not have
to be plugged in.
. Press the
Open Button
and load a DVD into the unit’s DVD-Drive. Close the DVD
Door, and the DVD will start automatically.
. Use the
Directional Buttons
to navigate through the DVD menu.
. Press the
Play Button
or
Enter Button
to make selections in the DVD menu.
5. Press the
Pause Button
to pause a DVD during play.
6. Press the
Previous & Next Buttons
to skip backwards and forwards through DVD
chapters.
7. Press the
Menu Button
to go back to the DVD’s main menu.
Programming a DVD
1. Insert a DVD into the unit.
See the “Playing a DVD” operation on page 16.
. After the DVD is inserted and loaded, press the
Program Button
on the remote
control to display the
Program Menu
.
. Use the
Directional Buttons
to move through the sixteen different program slots.
. Highlight a slot and enter a
Title
(T) number and
Chapter
(C) number using the
Number Keypad
on the remote control. Repeat steps and until the desired titles
and chapters are programmed.
5. Highlight the “Play” button, on screen, using the
Directional Buttons
, and press the
Enter Button
to begin playing the programmed titles and chapters.
PROG
PLAY
CLEAR
T
C
T
C
T
C
T
C
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
--:--
