10
Bluetooth & Charging
Pairing a Bluetooth Device
1. With the unit powered on, press the Source button to switch to Bluetooth Mode.
The display will show
the Bluetooth icon .
2. Press the Pair button. The icon will flash quickly on the display.
When pairing, remain within 3 feet
of the unit.
3. Using the controls on your Bluetooth device, select the IHB624 in your Bluetooth settings to pair. If your
device requests a password, enter the default password 0 0 0 0 .
Refer to the user’s manual for your specific
device for instructions on pairing and connecting Bluetooth devices.
4. When successfully paired and connected, the icon will stop flashing and audio will be heard
through the speakers.
After initial pairing, the unit will stay paired unless unpaired manually by the user or erased due to a
reset of the device. If your device should become unpaired or you find it is unable to connect, repeat
the above steps.
Charging a Device
1. Make sure the unit is plugged into the wall.
2. Using the appropriate USB charging cable (not included), connect one end to the device you wish to
charge and the other to the USB Charger on the unit. The device will now charge.
Note: This device uses a USB charging port with a 1A maximum charging capacity. Refer to the user’s manual
for your specific device for manufacturer's required charging amperage as well as determining the appropriate
cable for your device before charging.
Playing Audio Wirelessly
1. To play, pause or skip the selected track, use the controls on the connected Bluetooth Device or press the
Play/Pause or Skip/Tune buttons on the unit.
2. Audio played through the connected Bluetooth device will now be heard through the speakers.
