Speakerphone
1. To accept a call, press the
button, or use the
controls on the connected phone.
2. To end a call, press the
button, or use the controls
on the connected phone.
3. To re-dial the last dialed number, press the
button twice.
Pairing Bluetooth & Playing Audio
After initial pairing to a Bluetooth device, the headphones will
stay paired unless unpaired manually by the user, or erased due
to a reset of the device. If your device should become unpaired
or you find it is unable to connect, repeat these steps.
1. Press and hold the Power button to power on the unit.
2. Press and hold the Pair button for 7-9 seconds to begin
pairing. The LED indicator will begin quickly flashing
blue and red.
When pairing, remain within 3 ft. of the unit.
3. From your smartphone or other Bluetooth device, access
Bluetooth Settings and search for nearby devices. Select
SAHB48 when it is discovered.
4. When successfully paired, the LED indicator will
turn solid blue and a voice will announce “Bluetooth
connected”.
5. Audio played through the connected Bluetooth device
will now be heard through the headphones. Use the
controls on the connected device to select and begin
playing audio.
6. Use the controls on the connected device or the earbuds
to play, pause, skip, or change volume.
Customer Support
Customer Service:
1-888-999-4215
| Email Support:
prodinfo@
dpiinc.com
| Email Parts:
For Warranty Information and the most up-to-date version of
this User’s Guide, go to www.iLiveElectronics.com
To download this User’s Guide in English, Spanish, or French, or
to get answers to frequently asked questions, visit the support
section at: www.iLiveElectronics.com
Para descargar este Manual del Usuario en inglés, español y
francés, o para obtener respuestas a preguntas frecuentes,
visite la sección de apoyo en: www.iLiveElectronics.com
Pour télécharger ce guide de l’utilisateur en anglais, espagnol
ou français, ou pour obtenir des réponses à des questions
fréquemment posées, consultez la rubrique d’assistance sur:
www.iLiveElectronics.com
Copyright © 2018 Digital Products International (DPI, Inc.).
All other trademarks appearing herein are the property of their
respective owners.
Specifications are subject to change without notice.
FCC Warnings
WARNING: Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Additional Warnings
• WARNING: To prevent fire or shock hazards, do not expose this unit to rain
or moisture.
• WARNING : Where the mains plug or appliance coupler is used as the
disconnect device, such disconnect device shall remain readily operable.
• Lithium batteries, like all rechargeable batteries, are recyclable and should be
recycled or disposed of according to state and local guidelines. They should
never be disposed of in normal household waste, and they should never be
incinerated, as they might explode. Contact your local government for disposal
or recycling practices in your area.
• This product meets and complies with all Federal regulations.
•
To avoid hearing damage,
make sure that the volume on your music player
is turned down before connecting your headphones. After placing headphones
in/on your ears, gradually turn up the volume until you reach a comfortable
listening level.
Aux In
Aux In mode will function even if the headphones are not
powered on. To conserve battery power, keep them powered
off when using Aux In.
Requires a 3.5mm audio cable (included).
1. Connect a 3.5mm audio cable to the Aux In on the
headphones and the audio output on an audio device.
2. Use the controls on the connected device to select and
play audio.
WARNING :
This product can expose you to chemicals
including lead, which is known to the State of California to
cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov.
This
product meets and complies with all Federal regulations.
