GB
4
INSTALLATION OF THE OVEN
To install the oven into the kitchen a cutout should be made in accordance with the
dimensions shown in the Cutout & Dimensions figure.
The apparatus is to be fastened to the top by means of the two screws provided in the
kit through the holes made on the oven uprights.
The cabinet in which the apparatus is installed shall be open on the back side to ensure
a sufficient air circulation and prevent overheating.
WARNING
As the apparatus is to be fitted in your kitchen furniture, make
sure that all surfaces in contact with the oven can resist a
temperature of approx 90°C.
Electricals
-
Absorbed power:
oven top element:............................................. 1200+1000W 230V - 1200+1000W 240V
oven bottom element: ...................................... 1100W 230V - 1100W 240V
round element (hot air): .................................... 2300W 230V - 2300W 240V
(on some models)
roasting jack motor: ......................................... 4 W (on some models)
lamp: ................................................................ 25 W
hot air fan motor:............................................... 25 W
cooling fan motor:............................................. 25 W
-
Maximum absorbed power:
(see data plate).
- Supply voltage: (see data plate).
NOTE
This appliance is in compliance with following European directives:
2006/95/CE (LVD), 2004/108/CE (EMC), 2011/65/CE (RoHS),
2012/19/UE (WEEE), 2002/40/CE.
Summary of Contents for 600SPYTC
Page 1: ...INSTRUCTION MANUAL FOR 60 SERIES BUILT IN OVEN 600SPYTC...
Page 59: ...GB 56...
Page 60: ......
Page 61: ...09X8430 ed 04 2016...