Ilife V3s Pro, User Manual, Page: 18 / 128

Trouble Shooting
2. Errors appearance
Errors
Likely Cause
appearance
Circling in
V3s Pro robot's side
place
wheel is stuck
Keep
A cliff sensor is dirty or
moving back broken.
Bump the
The bumper is
obstacle
continuously
compressed
Short
The battery storage
working time capacity weakens.
No charging fully.
"Cleaning" Something
like pet hair
light
filled in the socket of
the charger.
is off when The robot's battery is
charging
not connected
Vacuum dirt, Filter is dirty or wet by
debris less water.
Spit out litter The dust bin is full.
The setting for Time
Scheduling isn't saved.
Time Scheduling
The robot function is cancelled
will not clean when you re-start the
automatically robot.
at scheduled The robot is powered
time. OFF.
The robot's battery is low.
The robot's components
are tangled with debris.
Solution
Clean V3s Pro robot's side wheels of
hair and debris. Push them in and out
and confirm that they both turn freely.
Start V3s Pro robot in a new location.
Inspect and clean V3s Pro robot's cliff
sensors.
Briskly tap V3s Pro robot's bumper
10-20 times to dislodge any debris that
may be trapped under the bumper or
loosen the screw of the bumper.
Replace the battery.
Recharge the robot.
Clean the socket, check the
connection between charger and
battery.
Clean Filter or change the Filter
Empty the dust bin.
Reset Time Scheduling function,
remember the final confirmation
Power ON the robot.
Keep the robot powered ON and on
the Charging Dock to make sure it has
a full battery to work at any time.
Power OFF the robot, clean the Dust
Bin and invert the robot. Clean Side
Brushes and the Main Brush.
13
For more detailed information, please v1s1t: www.ilifcrobot.com