PAGE 12
PAGE 13
3.Product Operating
3.Product Operating
Timing reservation
Cancel the reservation setting
3.5 Instructions of watertank
Filled water
Sticking mop clothes
Install watertank components
Mopping floor
Short key
, the remote control screen
hours area (as, the first two characters) flashes.
Use the arrow keys to adjust the appointment time.
After the reservation time is adjusted, press the key
to save, the host will automatically clean
at the appointed time every day
If you do not press the key
to save, the current time setting is unsuccessful.
The remote control display screen can
be scheduled to "00 :: 00", canceled successfully.
When you set the current time and appointment time,
all operations will be prompted to confirm;
if there is no tone, it means that the setting is invalid.
When replacing the remote control battery, reset the
current time and the appointment time.
This product is equipped with water tank components, cleaning work is completed,
if the mopping up demand, the dust box can be replaced with water tank components.
For the cleaning method, please refer to maintenance section in this manual.
Do not use the water tank assembly on the carpet. When cleaning with the cloth, fold
the edge of the carpet so that foreign matter on the cloth does not stain the carpet.
Cleaning, please keep an eye out, add water or clean up in time, add water to remove
the water tank.
Normal operation of the machine with water tanks, such as artificial stop, need to
remove the water tank placed separately to avoid a lot of water stains on the floor.
Work is completed, the timely cleaning of dirty rags; if there is residual water tank,
you need to take out a separate place, until the water is finished, put away for the
next use of storage.
When charging, be sure to remove the tank assembly.
Need to vacuum, let the machine stop working, remove the water tank after removing
the cloth rack, into the trash, you can start again. (Recommendation: first after
the mopping of the vacuum)
Note: put into the water tank, should keep the machine flat state, prohibit the machine side or upside down!
12
PAGE 5
PAGE 4
2. Product components
2. Product components
Remote control
Time Setting Button/Clock Button
Auto Charge Button/Home Button
Dual IR Signal Transmitter
L
CD
D
isplay
CLEAN
/
Standby Button
Direction Button
Schedule Button
Spot Clean Button
Edge Clean Button
2.4
Charging base
Transparent Cover
Signal Light
Charge Connecting Point
Power Supply Socket
Housing
2.5
Light Indications
2.6
Robot status
Charging
Lights status
Orange lights flash
Charging finished
In selected mode
When robot in error
Low battery
In cleaning mode
Green lights turn solid
Green lights flash
Red lights flash
Orange lights turn solid
Green lights turn solid
5
Summary of Contents for Beetles
Page 1: ...User Manual User Manual ...
