PAGE 7
PAGE 6
。
3.Product Operating
3.Product Operating
3.1、
Attention
3.2、
Auick-operating
Before starting the work, please refer to the following guidelines to check the cleaning area.
The power cord and other debris from the ground
may catch or entangle the product.
Be sure to remove it before use.
Roll up the carpet tassel or work on a short rug
Home bottom of the gap may be less than
8CM stuck products, for cleaning,
please boost furniture
Layers should be placed on the edge of
the compound layer to ensure safe operation
of the product
Charging preparation
Connect the power supply, then the indicator on the charging stand will be on.
Connect the adapter to charging stand
Do not place objects such as mirrors and other strong surface, do not charge the signal
on the seat near the source of interference (such as television, refrigerator, etc.),
and do not place the battery, ;
Turn on robot
Turn on the side power switch,
"I" for the boot, "O" for shutdown.
The host end work, it is recommended
not to shut down; keep the host in the
charging state, so that its better for
the next work.
Warm Tip: Before charging the machine, make sure that the main power switch is on,
otherwise the machine can not be charged effectively.
6
PAGE 10
PAGE 11
3.Product Operating
3.Product Operating
3.Product Operating
Host in the cleaning process, can perceive their
own lack of electricity, automatically start the
"return charge" mode, automatically find the charging
base for charging.
Auto self-charging
You can also use the
setting on the remote
control to instruct the host to start the "Charge Back" mode.
Note: Please keep the cradle in the power state, otherwise,
the machine will not be able to find the cradle to charge.
Classic mode
The most common cleaning mode, the host automatically
clean, after the obstacles to change the direction of autonomy.
MAX mode
Applicable to the overall ground is dirty, more dust
in the case. Press the remote control MAX button to
enhance the host suction, the depth of strong suction.
3.4 Time programmed cleaning
Making an appointment with the remote control To facilitate cleaning, the product has a "reservation" function.
Time settings and reservation settings, require the remote control to issue instructions
to the host.
After the reservation is successful, the host will automatically perform the cleaning work
every day according to the set time.
Before setting the current time and the reservation time, make sure that
the host CLEAN key is on and the host is awakened. If the host is not woken up,
briefly press the CLEAN button on the main unit or the CLEAN key on the remote
control to wake it up.
Time setting
Short key
the remote control screen hours area
By
Adjust the size of the digital, by
switching
the clock, minutes, set the current time.
When the time adjustment is finished, press
to save the current time setting.
If you do not press the key
to save, the current time setting is unsuccessful.
(as the first two characters) flashes.
11
Summary of Contents for Beetles
Page 1: ...User Manual User Manual ...
