13
V7s
After cleaning, the dust box can be replaced with tank assembly if mopping is required.
1. Paste the water seepage cloth Push through the two xing corners of the water
seepage cloth along the lower end of the duster cloth, paste the water seepage
cloth securely, and mount the water seepage cloth bracket to the base of the robot
in alignment.
2. Feed water Open the rubber plug of the water lling nozzle, slowly ll water into the
water tank, and secure the rubber plug after the water tank is lled.
3. Install the tank assembly Open the middle cover of the robot, withdraw the dust
box, and simply place the lled water tank into the empty slot.
4. Mop the oor Activate any cleaning mode on demand, and then the robot will
perform the cleaning operation.
Tips:
1.
During the robot's mopping process, if the operation is suspended due to rell water or clean
the duster cloth, the robot will reschedule the planned route upon restart, to re-clean the
cleaned area. In order to achieve better cleaning performance, it is recommended to use the
robot in a single room when mopping.
2.
If a second room needs to be cleaned, it will be recommended to manually mode the robot to
the second room and rell the water tank or clean the duster cloth as appropriate.
3.
If multiple rooms need to be cleaned, refer to the above Paragraph 2 before cleaning please.
4.
Please do not use the water tank assembly on any blanket. Upon cleaning operation using the
duster cloth feature, please fold the edge of the blanket to avoid that foreign matters on the
duster cloth may pollute the blanket.
5.
When cleaning, please pay attention to water lling or clearance timely, and open the tank
plug during water lling.
6.
When charging, please remove the tank assembly.
Water Tank Operation