7
V7s
Product Installation
Starting up and charging
Long Press the start button on the robot for 3 seconds to turn on, and then press the recharge
button, the robot will be automatically charged on the charging base.
Tips:
1. If the robot is in low power and cannot be started on, please put the robot directly against the charging base.
2. When the adapter is charged, the robot doesn't accept instructions from the remote controller and the key
operations directed on the robot.
Charging Base Installing
Place the charging base against the wall on
the horizontal oor, and then connect it to the
power source.
Tips:
1. Remove all barriers within 1m on its left and right
and 2m at the front from the charging base.
2. The power cord on the oor may be dragged by
the robot and lead to displacement or power
failure of charging base.
3. The signal indicator on the charging base shall be
on constantly.
Installation of Side Brushes
Take out the side brushes from the packing
box and press them into the mounting holes
vigorously.