Red window
Empty
spool
FIG 2
4. Insert the film spool in the camera as shown in Fig 2
and push the tapered end of the paper into the long
slot in the empty spool.
5. Hold the film in this position, and turn the w i n d - o n
knob in the direction of the arrow (marked on it) until
the paper is secure, close the cover and l o c k it by
pushing the catch to L (lock).
6. Wind-on the film until you see markings in the red
window. Now wind slowly until the figure 1 appears in
the window. You are now ready to take your first
picture.
TAKING PICTURES WITH YOUR iLFOFLEX
Stand 6 feet.or more from the subject for best results.
1. Hold the camera at waist level w i t h the lens
pointing at the subject.
2. Remove the lens cap.
3. Raise the viewfinder hood and compose the picture
on the viewing screen.
4. With the shutter-setting lever at 'I' (instantaneous)
press the shutter release downwards, and the picture
is taken.
5. Wind the film until the next number appears in the
red w i n d o w .
NOTE
When the shutter setting lever is in the 'B' position, the
shutter will be open for as long as the shutter release
is pressed d o w n .
Make sure that you return the lever to (I) after using
the (B) setting.
TO REMOVE THE EXPOSED FILM
1. Wind-on until the film is completely on the take-up
spool. (You will see the end of the film pass the red
w i n d o w ) .
2. Open the camera in the shade and remove the
upper spool with the film, by pulling out the spool
clamp.
3. Secure the end of the film w i t h the gummed strip
and re-wrap the film in its original wrapping.
4. Take it to your Ilford dealer to be developed.
ILFORD LIMITED ILFORD ESSEX
Printed in Hong Kong
