5
ENGLISH
Before the Installation
Ensure that your Local registered installer can recommend wood stove installation.
Ensure that updated European, national and local standards can be fulfilled.
Ensure that the area can support the stove and installation weight.
Ensure that there will be sufficient space and access to service.
Ensure that the heat output of the stove is suitable for the room.
Warning!
Do not make any unauthorized changing on the stove.
Packing
The stove comes on a wooden pallet with a wood frame nailed down on vertical boards at the
corners.
Consult local regulations on the disposal of these materials; the wood has been treated to repel
vermin and may
not
be burnt in the stove.
First Time Use
Before the stove is heated up for the first time, we advise you to open all the doors and
windows in the room where the stove is installed, to ensure an optimal ventilation. When the
stove has reached operating temperature, the surface treatment will harden and emit a strong
odor for a short time.
Mounting
Before mounting, ensure that the base is even and secure. It has to be able to carry the weight
of the stove as well as the chimney and any other equipment.
There must be a fire resistant floor or floor plate around the stove to protect the floor against
damages from sparks. National and local regulations must always be respected.
If it is necessary to connect an elbow pipe, a curved rather than a sharp elbow pipe is
recommended as this causes the least possible reduction in the chimney draught. See more
under general directions and chimney.
Summary of Contents for 15 ECO
