8
press it to start adjusting the value of certain items with Up/Oown buttons when the
corresponding underline flash
Menu.
Press this button to step back.
Lock.
Locking the screen / cancelling the lock state, and entering the main menu
after the initialization of the device. After pressing lock key, the system will question
the users to save present setting or not. If not, the LCD will display the current
configuration state.
When the power is connected, the LCD will start to initialize the program. The LCD
menu goes as below chart.
DVB-T
650,0 MHz
1080i
6,93 Mbps
1. DVB-T: Modulating standard; 650.0 MHz: the current output frequency;
1080i: video resolution of signal source; 6.93 Mbps: the current encoding bit rate.
Status
Alarm
2. Alarm Status: For example, if the signals lose, it will give alarm and display error
type under this menu. For example: Video Not Lock.
Uptime
2 Days-01 : 25 : 38
3. Uptime: It displays the working time duration of the device. It times upon power
on.
Encoder
Impedance ; Video in status ; Resolution ; Video Bitrate ; Audio Bitate
4. Encoder parameters: User can enter the items respectively to set Encoder pa-
rameters.Interface: To selee! the input port (HOMI or CVBS). Video In Slutus: User
can view the video status under this menu. Resolutlon: signal source resolution,
User guide MAW-300
