6
Installation
RISK of damage to the unit
Mechanically handling the unit may result in damage. Do not connect the unit to the
power supply before or during assembly. Connect the unit as below instructed.
NO HOT PLUG ANO CONNECT THE CABLE AS FOLLOWING STEPS
1. Mount and tighten the screws and plugs to secure the unit to the wall. Left 10 cm
offree space around from each unit.
2. Connect the signal input in the respective connectors. The signal source can be
from a surveillance monitor, DVD, set-top box, CCTV and etc.
3. Connect cable to RF output to o STB/TV.
4. Optionally, connect the loop-through RF input coaxial cable.
5. Power supply connection: a) Connect the earth cable; b) Connect the power plug to
the unit mains connector; c) Connect the power plug to the mains socket.
Cascade Installation
MAW-300 unit has 1 TV signal to RF output encoded as DVB-T Digital TV signal.
Several MAW-300 units can be cascaded in order to increase the capacity. The
maximum capacity of a series of N units is 1xN incorporated TV signals. To cascade
2 or more units, connect the RF output of the preceding unit to the TV input
(Ioop-through) of the next unit (see right iIIustration).
MAW-300
MAW-300
1
1
1
1
5
2
2
3 4
User guide MAW-300
MAW-300
MAW-300
MAW-300
MAW-300
TV
DVD
DVD+STB+CAM+TV+CAM2
STB
CAM
CAM2
4000
USB
4000
USB
4000
USB
4000
USB
