70 MINI USER’S MANUAL
70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI se reserva el derecho de modificar esta información sin previo aviso.
7
70-MINI V.01.00 (01/07) 120009-0B.pdf IKUSI reserves the right to modify this information without prior notification.
3.3.- STARTING UP.
RECEIVERS
Proceed to connect the power supply and the output connections. Use the plug-in terminals and the
connection block diagram provide in this manual (page 11).
Transmitters without display: RUN signalling LED in solid green colour. In transmitters with
LCD display: “WORKING OK”; if the transmitter is the owner of the receiver.
Turning on the T70MG10 transmitter model:
1- Insert the transmitter’s batteries (2 AA type batteries).
2- Press ON/OFF function. The transmitter remains powered.
3- Enter the key code: press simultaneously “7” + “8” functions.
4- Press “10” function. Equivalent to the START function.
5- Transmitter in ON state (solid green LED).
Turning on the T70MH3 / T70MH2 transmitter model:
1- Insert the transmitter’s batteries (2 AA type batteries).
2- Press ON/STOP function. The transmitter remains powered.
3- Enter the key code: press simultaneously
◄
►
functions.
4- Press
START.
5- Transmitter in ON state (solid green LED).
Turning on the T70MH3D transmitter model:
1- Insert the transmitter’s batteries ( 2 AA type batteries).
2- Press ON/STOP function. LCD display message: “PLEASE WAIT”
3- Enter the key code: press simultaneously
◄
►
functions.
LCD display message: “PRESS START”
4- Press START.
5- Transmitter in ON state. LCD display message: “WORKING OK”
TRANSMITTERS:
LED’s signaling in correct operating mode:
1) No radio link with the transmitter:
“Power”: solid green.
“Hard-OK”: solid green.
“Signal”: Blinking if there are transmitters near and
in the same band.
2) There is a radio link with the transmitter:
“Power”: solid green.
“Hard-OK”: solid green.
“Signal”: green blinking fast.
“Data”: green blinking fast.
“ID”: green blinking fast.
3) With STOP relay activated and active outputs:
“Power”: solid green.
“Hard-OK”: solid green.
“Signal”: green blinking fast.
“Data”: green blinking fast.
“ID”: green blinking fast.
“Relay”: solid green if the STOP relay is activated.
“Order”: green (variable intensity), if one or more PWM outputs are activated.
“Order”: green (fixed intensity), if at least one or more relay outputs are activated.
T70MG10
T70MH3
T70MH3D
T70MH2
