IKB01 SERIES INSTALLATION
1.The hood has to be installed inside the cabinet. It is recommended to
install a front and rear stud support. Refer to Figure 1.and figure 2.
1
2
2.Determine and mark the centerlines on the base of the wood frame where the
insert will be installed.
3.Determine and make all necessary cuts in the wall or ceiling for the ductwork.
Note: Install the duct work before installing the insert.
4.Cut out the opening where the insert will be installed. Refer to Figure 3
3
5.Slide the hood to the opening.
6.The hood could be installed a front and rear stud support, it also could be
installed a left and right stud support. front side and rear side have 8 holes,
each side has 4 holes, left side and right side have 4 holes, each side has 2
holes refer to figture 4.
7.Locate the screw holes on each side of the insert.
Adjust the level of the hood casing support according to the thickness of the base.
8.Secure the hood using the screw holes that are located at
the front and back or left and right of the unit (screws provided). Refer to figture 4
9.Make sure the hood casing support is secure before releasing.
4
·
7
·
·
8
·