iks aquastar midi
45
3R Begin
Specifies when your
interval
is to be
active
. For example, you can specify that your socket is switched on
and off every 5 minutes in the morning between 10:00 and 12:00. To programme this you have to enter
10:00:00 here.
3S End
Specifies the
end of the interval
. This is where you have to enter 12:00:00 for the example in 3Q.
3T How long on?
For an interval function your socket remains switched on for a certain period of time 'A', then it is switched off
for a period 'B' and then switched on again for the period 'A' etc. This is where you enter the
time
period 'A'.
3U RandomFactor.On
Time 'A' (socket on) can be prolonged by a
random period
. This period constantly changes within a range
between 0 and the time you enter here.
3V How long off?
This is where you enter the length of time 'B'(socket off).
3W RandomFactor.Off
Here you can produce a random
variation of time period 'B'
(socket off) (also refer to 3U).
3Y Latitude
Enter the desired latitude here.
3Z Longitude
Enter the desired longitude here.
40 Time zone
Enter the time zone here.
8.4 Measurement settings
41 Trend period
(only in the "Professional" level)
The
iks aquastar midi
determines the
development of your water values
over a certain period of time. You
specify that period here.
42 Memory store
Input of the settings for storing measurement data in the memory (e.g.
Storage interval
).
43 Display
With an
iks aquastar midi Redox
you can decide here whether the redox potential is to be shown in mV or
whether the rH value should be displayed. This is also where you can set the duration of the display for both
the internal LCD and the external display.
45 Mem.Intval
The
iks aquastar midi
stores at regular intervals the
measurements received
from the connected
sensors
.
You specify these intervals here.
46 Mem. capacity
This point shows you for how many chains of measurements you still have space available in the memory. A
chain of measurements comprises all measurement values transmitted by sensors (maximum 2).
47 Erase mem.
By selecting "Yes" you can erase the measurement-chain memory. Please note that all previously stored
measurement chains are then lost irrevocably
(transfer these to a PC beforehand where necessary).
Summary of Contents for aquastar midi
Page 25: ...iks aquastar midi 25 Notes ...
Page 54: ...iks aquastar midi 54 14 Notes ...