Ikra ITHK 1000, Operating Instructions Manual

Page: 37 / 112

37
GB ENGLISH
Warning! Always remove the plug before checking and setting work.
Replacing the guide bar and saw chain
WARNING
Wear protective gloves.
A dull or improperly sharpened chain can cause
excessive motor speed during cutting which may
result in severe motor damage.
Failure to replace or repair a damaged chain can
cause serious injury.
The saw chain is sharp. Always wear protective
gloves when performing maintenance to the chain.
Maintenance plan
Daily check
Bar lubrication Before each use
Chain tension Before each use and
frequently
Chain sharpness Before each use, visual
check
For damaged parts Before each use
For loose fasteners Before each use
Chain brake function Before each useInspect
and clean
Guide Bar Before each use
Complete saw After each use
Replacement parts
Spool 78001921
Blade 73040106
Chain Oregon 91PX033X
Guide Bar 080SDEA318
Chain must be fitted with bar from the same
manufacturer according to above combinations.
DISPOSAL
If your device should become useless somewhere in the
future or you do not need it any longer, do not dispose
of the device together with your domestic refuse, but
dispose of it in an environmentally friendly manner.
Please dispose of the device itself at an according collec-
ting/recycling point. By doing so, plastic and metal parts
can be separated and recycled. Information concerning
the disposal of materials and devices are available from
your local administration.
Problem Potential causes Solutions, tips
The hedge trimmer
does not run.
No electricity Check whether the hedge
trimmer is connected to mains
electricity.
House fuse or residualcurrent
circuit breaker has
been tripped.
Check the extension cord for
damage.
The motor overload
protection has triggered
because the motor has
been overloaded or has
overheated.
Let the hedge trimmer cool off
for 15–20 minutes.
Not enough power,
not running
smoothly
The hedge shears have
been jammed by plant
remains or foreign objects
(e.g. a piece of wire).
Disconnect the hedge trimmer
from the mains first. Inspect the
hedge shears and remove any
foreign objects.
Hedge shears are dull or
damaged.
Have the hedge trimmer
checked by a specialist
workshop.
TROUBLESHOOTING
If you are unable to rectify the problem, contact our service department (details
provided on the warranty card) or find a specialist workshop.