Ikra ITHK 1000, Operating Instructions Manual

Page: 28 / 112

28
TECHNICAL DATA
Multi-funktion garden tool ITHK 1000
Operating voltage 230-240V
Nominal frequency 50 Hz
Nominal consumption 1000 W
Device length 2,08 - 2,75 m
Sound pressure level L
pA
Uncertainty K = 3 dB (A) 89 dB (A)
Sound power level L
WA
104 dB (A)
Weight without battery (without cutting tool and shoulder strap) 5,1 kg
Vibration details
Total vibration values (triaxial vector sum) Determined properly ISO 22867,
Uncertainty K = 1,5 m/s
2
Vibration emission value a
h
(handle back / front) 3,62 m/s
2
Cordless Pole Hedge trimmer
Cutting length 480 mm
Cutting width 18 mm
Cordless-Chain saw
Chain Oregon 91PX033X
Guide bar type 080SDEA318
Usable cutting length 200 mm/8“
Chain oil tank capacity 120 cm³
Technical changes reserved.
WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is
used for different applications, with different accessories or poorly maintained, the vibration emission may differ. This
may significantly increase the exposure level over the total working period.
The vibration emission level will vary because of the ways in which a power tool can be used and may increase above
the level given in this information sheet.
The vibration emission level may be used to compare one tool with another.
It may be used for a preliminary assessment of exposure.
An accurate estimate of the vibratory load should also take into account the times when the tool is shut down or when
it is running but not actually in use. This may significantly reduce the vibratory load over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and
the accessories, keep the hands warm, organisation of work patterns.
GB ENGLISH