Ikra IGT 650 D-TC, Original Instructions Manual, Page: 18 / 36

18
Carry the string trimmer with the handle, with the blade
being off (idle). Careful appliance handling reduces the risk
of injury by knife.
The appliance must be stored in a dry place and protected
from frost.
Store idle power tools out of the reach of children and do
not allow persons unfamiliar with the power tool or these
instructions to operate the power tool.
MAINS CONNECTION
DANGER!
Operation is only allowed with a safety switch against
stray current (RCD max. stray current of 30mA).
Before use check machine, cable, and plug for any dama-
ges or material fatigue. Repairs should only be carried out
by authorised Service Agents.
Insert the plug of the electrical cable in a socket of suitable
shape, voltage and frequency complying with current
regulations.
Keep the connection and extension cables away from
dangerous moving parts to avoid damaging them.
Only use splash proof extension cables approved for
outdoor purposes. The stranded wire cross-sectional area
of the extension cable must be at least 1.5 mm
2
for cables
up to 25 m and 2.5 mm
2
for cables above 25 m.
Only plug-in when machine is switched off.
The device is only intended for use on premises that have
a continuous current carrying capacity of >=100 A per
phase and are supplied from a electrical grid with a rated
voltage of 400/230V.
If necessary, please consult your electricity company to
ensure that the continuous current carrying capacity of
the mains at the connection point is sufficient for connec-
ting the device.
WARNING
WARNING! Electric shock! There is a risk of an injury
caused by electric shock!
Do not use the device if the cable or plug is damaged or
worn.
If the cable is damaged during use, it must be discon-
nected from the mains supply immediately. Do not touch
the cable until it has been disconnected from the mains.
Do not connect a damaged cable to the power supply
and do not touch a damaged cable before disconnecting
it from the power supply, as damaged cables can lead to
contact with active parts.
SYMBOLS
Warning/caution!
WARNING! Please read the instructions careful-
ly before starting the machine.
Wear eye protective goggles !
Wear ear protectors!
Wear safety cut through resistant shoes with
safety sole and steel toe !
Unplug immediately if the power cord or
plug becomes damaged !
Warning against thrown-off items
Do not let other persons get near due to fo-
reign objects being thrown off. Minimum safe
distance is 15 m.
Do not expose the appliance to rain and do not
use it in wet or moisture conditions.
Protection class II
320 mm
Cutting diameter
96
Sound power level
DANGER OF INJURY! Cutting blade !
250
Cutting diameter
GB ENGLISH