Ikra IEVL 1532, Operating Instructions Manual

Page: 31 / 100

GB-11
GB | Operating Instructions
Fault Cause Remedy
Motor does not run No voltage Check connection line and connec-
tion protection switch
Roller blocked Check roller
Roller does not rotate Toothed belt defective Workshop
Motor output drops Working depth too high Selected lower working depth
Dirty housing Clean housing
Lawn too long for scarifying Lawn too long for scarifying
Poor scarifying perfomance Working depth too high Select lower working depth
Worn blades Replace worn blade
Noisy running, application vibrates Balde damaged Workshop
Fault, which cannot be rectified with the help of this table, may only be attended to be an authorized company
(workshop).
12. TROUBLESHOOTING
WARNING! Only perform the steps described in
these instructions! All further inspection, main-
tenance and repair work must be performed by
a qualified specialist! Contact a specialist if the
problem cannot be solved by yourself!
WARNING!
If the product does not perform prop-
erly, or sound are abnormal, or motor cannot be
started, or stopped as described, or the cutting
device does not work properly, or any other ir-
regularity, or malfunction occurs, do not attempt
to repair the product by yourself.
Please contact helpline or service center.
Before carrying out any maintenance opera-
tions, cut off the electric power supply by dis-
connecting the plug from the extension cable.