Ikra GM ARM 4038 Gartenmeister Operating Instructions Manual Download Page 27

GB

 | 

Operating Instructions

GB-5

lawnmower safely and understand the re-

sulting dangers that are involved.

 

-

Children are not permitted to play with the 

lawnmower.

 

-

Cleaning and maintenance may not be carried 

out by children.

 

-

Never mow while other persons, in particular 

children or animals, are nearby. The minimum 

distance is 5 metres.

 

-

Do not leave the lawnmower unattended when 

operating.

 

-

Bear in mind that the operator or user of the 

machine is responsible for accidents involving 

other people or their property.

 

-

The charging station can be used by children 

aged 8 and over, as well as by people with 

limited physical, sensory, or mental capabili-

ties, or a lack of experience and knowledge 

if they are supervised or informed of how to 

use the device safely and understand the re-

sulting dangers that are involved. Children are 

not permitted to play with the charging station. 

Cleaning and maintenance may not be carried 

out by children without supervision.

 

-

Never allow children to play with the packag-

ing film. Children can get caught up in this and 

suffocate when playing.

WARNING!

 

Risk of explosion!

Improper use of the battery can cause explo-

sions.

 

-

Protect the rechargeable battery from fire and 

heat. Never place the rechargeable battery on 

radiators and never expose it to strong sun-

light for extended periods.

WARNING!

 

Risk of fire!

Improper use of the battery can cause fire.

 

-

Never charge batteries in the vicinity of acids 

and flammable materials.

 

-

Only charge the battery at an ambient temper-

ature between 0 °C and 40 °C.

 

-

Allow the rechargeable battery to cool after 

heavy use.

WARNING!

 

Risk of injuries due to handling the 

charging station improperly!

Handling the charging station improperly can 

cause injuries.

 

-

Do not run the mains cable so that is becomes 

a trip hazard.

NOTE! 

Risk of damage!

Handling the lawnmower improperly can cause 

damage.

 

-

The safety devices installed on the lawnmow-

er must not be removed or modified and exter

-

nal safety devices must not be installed.

 

-

Before use, always ensure that the cutting 

blade, blade screws and the mowing unit are 

not blunt, worn or damaged. In order to avoid 

an imbalance, worn out or damaged cutting 

blades and fastening bolts must be replaced 

in complete sets.

 

-

Do not use the lawnmower to trim bushes and 

hedges, as a chipper to shred tree and bush 

cuttings, or to level out ground unevenness.

 

-

Carefully check the surface on which you wish 

to use the lawnmower and remove any ob-

jects that could damage the lawnmower and 

the cutting tools, fasteners or the entire cutting 

unit in particular.

 

-

Ensure that the cutting blades do not come 

into contact with the ground on uneven sur-

faces.

 

-

Switch the lawnmower off as soon as you 

have finished working.

 

-

Stop the cutting blade if the lawnmower has to 

be tilted to be transported over surfaces other 

than grass and when moving the lawnmower to 

and from the surface to be mown.

 

-

Stop the lawnmower, remove the safety key 

and ensure that all moving parts have come to 

a complete standstill and have cooled down:

•  whenever you are not using the lawnmower,

•  whenever you leave the lawnmower;

•  to clear a blocked cutting blade,

•  to remove blockages from the discharge 

channel,

•  to adjust the cutting height,

•  to empty the grass collection box,

•  if you encounter a foreign object,

•  to lift the lawnmower or carry it away,

•  to tilt or transport the lawnmower (e.g. from/

to the grass or over paths).,

•  before you check, clean or carry out any 

work on the lawnmower.

 

-

If the lawnmower starts to vibrate excessively, 

a careful inspection is required. Stop the lawn

-

mower immediately and remove the safety 

key. Ensure that all nuts, bolts and screws are 

firmly tightened and look for damage. Repair 

the damaged parts as required.

 

-

Check the lawnmower for damage if it has 

come into contact with foreign objects.

Summary of Contents for GM ARM 4038 Gartenmeister





































Reviews: