GB
|
Operating Instructions
12
Storage
If the device is not going to be used for a few months, it is
preferable to leave the battery in the charger. Otherwise
proceed as follows:
-
Fully charge the battery
-
Remove the battery from the device
-
Store the device and the battery in a safe and dry
place. The storage temperature must always be in the
range b5 degrees Celsius and + 40 degrees
Celsius. Place the battery on a level surface.
-
Before using the device after prolonged storage, fully
charge the battery again
Repair Service
Repairs to electric power tools should only be carried out
by specialist electrical personnel.
Always keep the original packaging for a possibly re-
quired shipping of the tool.
Information for environmental protection/ dis-
posal
Dispose of the machine properly after it is worn out. Dis-
connect the mains cable in order to prevent misuse. Do
not dispose of the machine with the household waste. In
the interest of environmental protection, take it to a col-
lection point for electric machines. Your responsible local
authority can provide you with addresses and operating
times. Also take the packaging materials and worn out
accessories to the appropriate collection points.
Only for EU countries
Do not discard electric tools in the household
waste!
In accordance with European Directive 2012/19/EC on
waste electrical and electronic equipment and its imple-
mentation in national law, waste electric tools must be col-
lected separately for environmentally-compatible re-use.
Recycling alternative to the return invitation:
Instead of returning the electric equipment, the owner is
alternatively obligated to take part in the proper recycling
in the case of relinquishment of ownership. The waste
equipment can also be taken to a collection facility which
disposes of it in the sense of the national recycling man-
agement and waste acts. This does not pertain to the ac-
cessory parts and auxiliary equipment without electrical
components accompanying the waste equipment.
Spare parts
Please contact our service department if you need acces-
sories or spare parts.
When working with this machine, do not use spare parts
other than those recommended by us. Using spare parts
not recommend by us can result in serious injuries to per-
sons or damage to the machine.
The following information should be provided when or-
dering spare parts:
• Type of machine
• Item number of the machine
Warranty
For this electric tool, the company provides the end
user - independently from the retailer‘s obligations re-
sulting from the purchasing contract - with the following
warranties:
The warranty period is 24 months beginning from the
hand-over of the device which has to be proved by the
original purchasing document. For commercial use and
use for rent, the warranty period is reduced to 12 months.
Wearing parts and defects caused by the use of not fitting
accessories, repair with parts that are no original parts of
the manufacturer, use of force, strokes and breaking as
well as mischievous overloading of the motor are exclud-
ed from this warranty. Warranty replacement does only
include defective parts, not complete devices. Warranty
repair shall exclusively be carried out by authorized ser
-
vice partners or by the company‘s customer service. In
the case of any intervention of not authorized personnel,
the warranty will be held void.
All postage or delivery costs as well as any other subse-
quent expenses will be borne by the customer.
EC Declaration of Conformity
We,
ikra GmbH, Schlesierstraße 36, 64839 Münster,
Germany
, declare under our sole responsibility that the
product
Chain saw attachment
GM AAS 4025 Garten-
meister,
to which this declaration relates correspond
to the relevant basic safety and health requirements of
Directives
2006/42/EC
(Machinery Directive),
2014/30/
EU
(EMC-Guideline),
2011/65/EU
(RoHS-Guideline) and
2000/14/EC+2005/88/EC
(noise directive) incl. modifica
-
tions.
For the relevant implementation of the safety and
health requirements mentioned in the Directives, the
following standards and/or technical specification(s) have
been respected:
EN 60745-1:2009+A11:10; EN ISO 11680-1:2011
EK9-BE-89:2014
PAK-Anforderung für GS (PAH requirement for GS)
AfPS GS 2014:01 PAK;
EK9-BE-77 (V3):2015; EK9-BE-91:2015
EN 55014-1:2006+A1:2009/+A2:2011
EN 55014-2:2015
DIN EN 50581:2012
Engineering type licence No.: 18SHW0019-01
Intertek Notified Body 0905
measured
sound power
level
97,4 dB(A)
guaranteed sound power level 100 dB(A)
Conformity assessment method to annexe V / Directive
2000/14/EC
The year of manufacture is printed on the nameplate and can be additionally
retrieved via the consecutive serial number.
Münster, 09.01.2018
Matthias Fiedler, Senior Product Manager Ikra GmbH
Maintenance of technical documentation:
Ikra GmbH, Schlesierstrasse 36, 64839 Münster, Germany
