IKOS ECOpellets Insert, User Manual, Page: 96 / 120

EN // 96
USER’S MANUAL
EN
It is very important that the base where the insert is installed is completely horizontal.
If you do not have a base, the optional extendable table is available. This table is a metal
structure that must be fixed to the floor and to the wall. The table can be adjustable in height
between 300 mm (minimum) and 545 mm (maximum), it is very important to ensure that the top
is perfectly horizontal for the correct operation of the equipment. Together with the extendable
table, screws are delivered to secure the base of the insert to the table, with the same 7 screws,
it is possible to attach the equipment to an existing base.
Connect the 80 mm diameter pipe between the flue gas outlet and the flue outlet to the outside
of the building (e.g. fireplace).
After securing the base of the equipment and the chimney being installed place the moving
part of the equipment.
Then do a rotating motion to bring the equipment to the horizontal.
Material Type of attachment
Massive (slab, stone)
FMS M8x60 Ø10
Metallic
Massive and non-massive (brick)
FIP M8x60 Ø10
Chemical
Recommendations
10°
1 2
Instalação inserível