KF4
USER MANUAL - ENGLISH
8
can see the menus of “ List of played songs”, “Songs”, “Specialists”
and “Artists”.
3.20 Call Records
Come into the call records, you can view missed calls, reveived calls
and outgoing calls. The calling time is viewed in each record and fea-
tures such as calling, sending messages and adding to new contacts
can be set. Deleting call records and seting up speed dial can be
done in the menu.
3.21 Widget
The widget is on the right of applications in Main Menu, holding down
this widget, you can drag it anywhere you want in the main screen. It
is convenient for you to enter that procedure.
3.22 Selecting Wallpaper Source
Hold down the main screen, the options of selecting wallpaper source
will appear, then you can set up wallpapers you like.
4. Text Input
Enter text via the keypad. Examples of text include contact details,
emails, short messages, and websites. The keypad provides the
functions of spelling prediction, spelling correction and learning
while using.
The smart keypad may give you prompts of correct spelling, de-
pending on which application you are using.
Enter text
1. Tap the text box (memo, or new contact) to call the keypad.
2. Tap the keys on keypad.
At the initial stage, you can tap keys using either of your index fingers.
Once you get familiar with the keypad, you can try tapping keys using
both of your thumbs.
While tapping a key, the corresponding letter will appear above your
thumb or another finger. If you are tapping a wrong key, you may slide
to the correct one. Only when your tapping finger leaves a key, can
the corresponding letter be entered in the text box.
5. SD Card Introduction
Your mobile phone supports SD card to expand the memory. Install
the SD card according to the indication.
As one of storages for your phone, SD card has been set as the de-
fault storage at factory. You can directly use it without making any
settings.
Use as flash disk:
If “Phone — Data Wire — PC” is well connected,
the PC will prompt “New hardware is found”, and “MT65xx Android
Phone requires to be installed” will appear in the dialog box (see
the figure).
Check the relevant menus in the phone are opened or closed, select-
ing one by one as follows:
Main Menu - Settings - Application - Development - USB debugging.
Uncheck “USB debugging”.
After checking and confirmation, reconnect “Phone - Data Wire - PC”,
and pull down notification menu.
Select “used as USB storage device”, and the following screen pops
Select “USB storage device”, and such dialogue box pops up:
Summary of Contents for KF4
Page 1: ...Model KF4 USER MANUAL...