-
10
-
IKENO INDUSTRIAL DEHUMIDIFIER - USER'S MANUAL - Model ID-series
Subject to change without prior notice
25. When turn on the machine, if it cannot work, then you should check the connecting
wires are in a normal situation or not. For circuit drawing, please see the attached picture.
26. If the refrigerating system works normally, please do not open it. For is is the closed
type, it is no need to add cryogen.
27. When the machine is under operation, if there is metal colliding sound, you should
stop the machine and check whether the screws of Fan is loosened or disengaged.
28. After 20 minutes’ operation, the drain pipe will have some water to be drained out.
(Refrigerating water should be full of the basin so that it will be drained out). If the
temperature/humidity is lower, the time needed will be longer. This is normal.
****
If the troubles have not been removed yet, please contact the dealer.
IMPORTANT USER INFORMATION
Intended use of the unit
The ID-series dehumidifier is inteneded to be used for the dehumidification of air. All other
uses of the equipment, or use which is contrary to the instructions given in this manual, can
cause personal injury and/or machine damage.
Warranty and obligations
The warranty period is 12 months from commissioning date unless otherwise advised in
writing. The warranty is limited to a free exchange complete with free freight, of faulty units
or components which have failed as a result of faulty quality or defects in manufacture.
Ikeno guarantees that the delivered unit has undergone rigid testing to ensure that the
specificatoins stated here are fulfilled. All claims on warranty must verify that the fault has
occurred within the guarantee period., plus that the unit has been used within its operating
range as stated in the specification. All claims must include the unit type and manufacturing
number.
Conformity with directives and standards
The Ikeno dehumidifier is designed and manufactured by an EN-ISO 9001 accredited
development and manufacturing organization. The unit conforms with the specifications in the
Machinery Directive 98/37/EEC, the Low Voltage Directive 73/23/EEC as amended by
Directive 93/68/EEC and the EMC Directive 89/336/EEC as amended by Directives 92/31/EEC
and 93/68/EEC. The standards applied are listed in the EC Declaration of Conformity.
***************************************************************
