17
If Manual flash is desired, press the button once, the strobe will
fire, press the
button a second time within two seconds, and then
use manual power settings on the strobe. To go back to TTL, turn the
strobe off and back on; return strobe power switch to TTL.
Final Check
1.
Re-check the o-ring seal. The seal should form an even, solid line
around the back of the housing.
2.
Turn on the camera and check all control functions.
3.
Make sure that the camera can obtain focus and take a photo.
4.
Check battery life and open storage space on your memory card.
5.
Check the flash, if using.
6.
Submerge the housing in a fresh water tank dedicated to
underwater photography equipment. Visually confirm that there are
no signs of water intrusion or a steady stream of bubbles coming
from one of the housing seals.
Entering the Water
1.
If possible, we recommend entering the water without your housing
to ensure that you are comfortable and your life-saving equipment
is in working order. Once you are stable, have someone pass your
camera housing to you.
2.
Submerge the housing at the surface of the water and visually
confirm that there are no signs of water intrusion or a steady stream
of bubbles coming from one of the housing seals. If water does
appear to be entering the housing, point the lens port downward
and return the housing to the surface as quickly as possible. Please
observe all necessary safety precautions. NEVER ascend faster
than accepted safety limits.
