7
Setting Up Your Camera
Pre-Installation Checklist
1.
Insert a fully charged camera battery.
2.
Insert a properly formatted memory card.
3.
Set Red-eye Removal to “OFF.”
4.
In Custom Menu set Eye Sensor > LVF/Monitor Switch > “MON.”
5.
In Custom Menu set Touch Settings > Touch Screen > “OFF.”
6.
Disable Post Focus: press Fn1 > Post Focus > “OFF.”
Setting Up Your Housing
Opening the Housing
1.
Push the lid snap lock forward and start to lift the curved end away
from the housing.
2.
Lid snaps are designed to provide enough force to compress the
o-ring for a proper seal. Keep firm pressure against the lid snap
while lifting it away.
Lid Snap Lock
3.
Repeat with remaining lid snap.
4.
Remove the housing back.
