15
Attaching a Fiber Optic Cord
1.
Check the end of the fiber optic cord to ensure that it is clean and
smooth.
Fiber Optic
Connector
O-ring
Fiber Optic
Ports
2.
Ensure that the fiber optic cord o-ring is in place. This o-ring does
not provide waterproofing, however it does keep the fiber optic cord
in place.
3.
Attach one end of the fiber optic cord into one of the fiber optic
ports on the front of the housing. The connector is a press-fit into
the fiber optic port.
4.
Attach the other end of the fiber optic cord to a compatible strobe.
5.
Set the strobe to the appropriate setting based on manufacturer
recommendations.
6.
Turn the camera on and pop up the built-in flash.
7.
Turn the strobe(s) on.
8.
Take a test photo to ensure that your strobe(s) is functioning
properly.
