17
4.
Attach the other end of the fiber optic cord to a compatible strobe.
5.
Set the strobe to the appropriate setting based on manufacturer
recommendations.
6.
Turn the camera on and pop up the built-in flash.
7.
Turn the strobe(s) on.
8.
Take a test photo to ensure that your strobe(s) is functioning
properly.
Maintenance
Post-Dive
1.
Rinse the housing in fresh water. Rotate the housing’s controls and
press each button while submerged in fresh water to flush out any
salt or debris to ensure smooth operation on future dives.
2.
NEVER leave your housing in the fresh water rinse tank. Collisions
with other equipment can cause scratches or damage to your
equipment.
3.
Stow the housing in a shaded place where it is protected from
impact or overheating. If no shade is available, we recommend
covering the housing with a towel or cloth.
4.
Check the memory card capacity and battery life of your camera
and strobe(s). Recharge as necessary.
5.
Always recheck o-ring seal after opening the housing.
Travel and Storage
1.
Remove the camera from the housing for travel or storage.
2.
Check the main housing o-ring.
3.
Close the empty housing and submerge in lukewarm fresh water.
While submerged, rotate each control and depress each button to
flush out any salt or debris.
